|
Ductformer
Model CR-8-DH Cleat Edge Former is designed to form the
drive cleat flange on both ends of the Duct in a single
pass through operation. The system can be incorporated into
nay existing Duct Fabrication System to produce 4’
and 5’ L-shape or Full Wrapper Duct.
Built
with the quality and integrity of all our standard Rollformers,
the system features an all gear drive, direct oil bath gear
reduction and sealed (lube for life) bearings to provide
the smoothest quietest Rollformer on the market to date.
The unit consists of two (2) Rollform head assemblies mounted
parallel side-by-side and positioned from handwheel leadscrews.
The roll tooling is designed to form the 180° drive
cleat hems on both edges of the pre-notched sheet metal.
As the pre-cut Duct passes through the Cleat Edge Former
the system will sense the notch to form the cleat edges
for the L-shape and Full Wrapper Duct.
For
systems using combination TDFC and “S” Slip
and Drive Cleat operations, the Rollformer features by-pass
conveyors. Using the handwheels provided the form rolls
open wider and the part can be by-passed or transferred
through on the by-pass conveyor to the next form sequence.
As
with all Ductformer Rollformers the quality of the CR-8-CF-DH
Dual Head Cleat Former can be observed as soon as the power
is turned on. The quiet silence while running reveals the
precision workmanship and superior design to provide years
of dependable service. Just like all Ductformer products
everything is American made at our plant in St. Louis, Missouri
and we back up everything we sell with the quality service
you deserve.
|
